| 6 Most Common Problems | | Diagnosis & Repair Cost (U.S. dollars w/o tax) |
| 1. Machine does not come on | |
|
| | a. No AC power to outlet | | |
| | - Transfer to electrician | | $43 - 58 |
| | b. Reset switch open | | $43 - 58 |
| | c. Defective motor | | $158 - 210 |
2. Machine hums but does not spin | | |
| | a. Debris has turntable stuck | | $43 - 58 |
| | b. Bearings worn excessively | | $158 - 210 |
3. Machine does not cut | | |
| | a. Sharpen blades by cutting ice | | $43 - 58 |
| | b. Blades missing from turntable | | $158 - 210 |
4. Machine grinds to slowly | | |
| | a. Not enough water | | $43 - 58 |
| | b. Trying to grind up material not allowed in the manual | | $43 - 58 |
| | c. Defective motor | | $158 - 210 |
5. Machine drains to slow | | |
| | a. Plumbing stopped up | | |
| | - Transfer to plumber | | $43 - 58 |
6. Machine leaks water | | |
| | a. D/W drain connection eroded | | $158 - 210 |
| | b. Seals deteriorated | | $158 - 210 |
| | c. Plumbing connections loose | | $43 - 58 |